Shifting Colors Scarf
Shifting Colors Scarf
Make five basic squares and four striped squares - then learn how to seam them together into a fantastic color-blocked scarf!
Step 1:Select your options
- Single Size
Approximately 8 x 72 inches [20.5 x 183 centimeters].
Step 2:Click each color to change it or go with the colors recommended by the designer
Materials not included in this kit:
Large eye blunt needle.
K = knit
rep = repeat
RS = right side
st(s) = stitch(es)
WS = wrong side
Details & Instructions
|Approximately 8 x 72 inches [20.5 x 183 centimeters].|
|Contrast A Wine (00015)||2|
|Contrast B Country Red (01530)||2|
|Contrast C Red (00095)||2|
|Contrast D Tangerine (01699)||2|
|Contrast E Tea Rose (00042)||2|
|Contrast A Country Green (01222)||2|
|Contrast B Sage Green (00084)||2|
|Contrast C Mod Green (01223)||2|
|Contrast D Mod Blue ()||2|
|Contrast E Robins Egg (01215)||2|
|Size 4.5 mm (U.S. 7) knitting needles or size needed to obtain gauge. Large eye blunt needle.|
19 stitches and 32 rows = 4 inches [10 centimeters] in garter stitch.
Make 5 Solid Squares, 1 each in Contrast A, B, C, D and E.
Cast on 38 stitches.
- Make a slip knot: Loop the yarn as shown and slip needle under the lower strand of the loop.
- Reach through the loop you just made and pull up a loop of yarn.
- Pull the yarn end attached to the ball of yarn to tighten the slip knot leaving the other end approx 4 ins [10 cm] long. Transfer needle to left hand.
- Insert the right-hand needle through slip knot and wind yarn over right-hand needle.
- Pull loop through slip knot.
- Place new loop on left-hand needle. (You now have 2 stitches (sts) on your left-hand needle).
- Insert right-hand needle between last 2 stitches (sts) on left-hand needle and wind yarn over right-hand needle.
- Pull loop through. Place this new loop on left-hand needle beside last stitch (st). (You now have 1 more stitch on left-hand needle). Repeat (rep) steps 5 and 6 until required number of stitches (sts) have been cast on left-hand needle.
1st row: (Wrong side). Knit.
2nd row: (Right side). Knit.
The Knit Stitch
- Hold the needle with cast on stitches (sts) in your left hand, and the loose yarn attached to the ball at the back of work. Insert right-hand needle from left to right through the front of the first stitch (st) on the lefthand needle.
- Wind the yarn from left to right over the point of the right-hand needle.
- Draw the yarn through this original stitch (st) which forms a new stitch (st) on right-hand needle.
- Slip the original stitch (st) off the left-hand needle, keeping the new stitch (st) on the right-hand needle.
- To knit a row, repeat steps 1 to 4 until all stitches (sts) have been transferred from left-hand needle to right-hand needle. Turn the work by transferring the needle with stitches (sts) into your left hand to knit the next row.
Repeat these 2 rows for garter stitch pattern. Continue in pattern as established until work from beginning measures 8 inches [20.5 centimeters], ending with a Right side (2nd) row.
Cast off knitwise (Wrong side).
Knit the first 2 stitches (sts). *Using left-hand needle, lift first stitch (st) over second stitch (st) and drop it off between points of the 2 needles. Knit the next stitch (st); repeat (rep) from * until all stitches (sts) from left-hand needle have been worked and only 1 stitch (st) remains on the right-hand needle. Cut yarn (leaving enough to sew in end) and thread cut end through stitch (st) on needle. Draw yarn up firmly to fasten off last stitch (st).
Weave in ends.
Weaving in Ends
- What do you do with those dangling ends at the sides of your work? Never cut without darning them in first because they will not be secure and your knitting could easily unravel. Thread each end onto a blunt ended large eye needle and make small alternating stitches into the side of your work taking care not to pull too tightly.
- After you’ve worked up in one direction about 2 inches [5 cm] turn and work backwards alternating over the spaces you just worked. Now you can safely cut the end.
Make 4 Stripped Squares in the following color combinations:
1 using A as Contrast A and B as Contrast B.
1 using B as Contrast A and C as Contrast B.
1 using C as Contrast A and D as Contrast B.
1 using D as Contrast A and E as Contrast B.
- To change colors, simply drop previous color and begin knitting with new color.
- When joining a new color for the fi rst time, leave a tail approximately 4 inches [10 centimeters] long to ensure you are left with enough yarn to weave in your end.
- When working narrow stripes as given below, do not cut your yarn when changing colors. Simply allow the color not in use to be drawn up loosely along the side of your work.
With A, cast on 38 stitches.
1st row: (Wrong side). With A, knit.
Proceed in Stripe pattern as follows:
1st row: (Right side). With B, knit.
2nd row: With B, knit.
3rd row: With A, knit.
4th row: With A, knit.
These 4 rows form Stripe pattern.
Continue in pattern as established until work from beginning measures 8 inches [20.5 centimeters], ending with a Right side (1st or 3rd) row.
With same color as previous row, cast off knitwise (Wrong side).
Weave in ends.
Sew squares together using a fl at seam as shown in Diagram, noting striped squares will be placed sideways.